| LINGHEIN CS Series SCREW AIR COMPRESSOR | |||||||||
| Model | Max Working Pressure | CAPACITY F.A.D | Motor Power | Transmission | Connection | N.W | Dimension (Lx W x H) | ||
| -- | bar | psig | m3/min | hp | kw | -- | -- | kgs | mm |
| CS4N-8 | 8 | 116 | 0.51 | 5.5 | 4 | Belt Drive | G1/2'' | 130 | 650*650*890 |
| CS4N-10 | 10 | 145 | 0.46 | ||||||
| CST4N-8 | 8 | 116 | 0.51 | 5.5 | 4 | Belt Drive | G1/2'' | 274 | 1547*650*1473 |
| CST4N-10 | 10 | 145 | 0.46 | ||||||
| CS5.5N-8 | 8 | 116 | 0.80 | 7.5 | 5.5 | Belt Drive | G1/2'' | 160 | 650*650*890 |
| CS5.5N-10 | 10 | 145 | 0.65 | ||||||
| CST5.5N-8 | 8 | 116 | 0.80 | 7.5 | 5.5 | Belt Drive | G1/2'' | 304 | 1547*650*1473 |
| CST5.5N-10 | 10 | 145 | 0.65 | ||||||
| CS7.5N-8 | 8 | 116 | 1.05 | 10 | 7.5 | Belt Drive | G1/2'' | 167 | 650*650*890 |
| CS7.5N-10 | 10 | 145 | 0.85 | ||||||
| CST7.5N-8 | 8 | 116 | 1.05 | 10 | 7.5 | Belt Drive | G1/2'' | 311 | 1547*650*1473 |
| CST7.5N-10 | 10 | 145 | 0.85 | ||||||
| CS7.5N TMDD-8 | 8 | 116 | 1.05 | 10 | 7.5 | Belt Drive | G1/2'' | 358 | 1547*650*1473 |
| CS7.5N TMDD-10 | 10 | 145 | 0.85 | ||||||
| CS11N-7 | 7 | 102 | 1.65 | 15 | 11 | Belt Drive | G3/4" | 230 | 850*650*930 |
| CS11N-8 | 8 | 116 | 1.64 | ||||||
| CS11N-10 | 10 | 145 | 1.35 | ||||||
| CS15N-7 | 7 | 102 | 2.00 | 20 | 15 | Belt Drive | G3/4" | 230 | 850*650*930 |
| CS15N-8 | 8 | 116 | 2.00 | ||||||
| CS15N-10 | 10 | 145 | 1.80 | ||||||
| CS18.5N-7 | 7 | 102 | 3.00 | 25 | 18.5 | Belt Drive | G1" | 330 | 710*740*1275 |
| CS18.5N-8 | 8 | 116 | 2.90 | ||||||
| CS18.5N-10 | 10 | 145 | 2.50 | ||||||
| CS22N-7 | 7 | 102 | 3.30 | 30 | 22 | Belt Drive | G1" | 345 | 710*740*1275 |
| CS22N-8 | 8 | 116 | 3.30 | ||||||
| CS22N-10 | 10 | 145 | 2.80 | ||||||
| CS30N-7 | 7 | 102 | 4.90 | 40 | 30 | Belt Drive | G1" | 490 | 860*850*1345 |
| CS30N-8 | 8 | 116 | 4.70 | ||||||
| CS30N-10 | 10 | 145 | 3.80 | ||||||
| CS37N-7 | 7 | 102 | 5.80 | 50 | 37 | Belt Drive | G1" | 524 | 860*850*1345 |
| CS37N-8 | 8 | 116 | 5.70 | ||||||
| CS37N-10 | 10 | 145 | 5.00 | ||||||
| CS45N-7 | 7 | 102 | 7.10 | 60 | 45 | Belt Drive | G1 1/2" | 650 | 1320*970*1380 |
| CS45N-8 | 8 | 116 | 6.80 | ||||||
| CS45N-10 | 10 | 145 | 6.00 | ||||||
| CS55N-7 | 7 | 102 | 9.40 | 75 | 55 | Belt Drive | RP2" | 880 | 1320*1160*1720 |
| CS55N-8 | 8 | 116 | 8.90 | ||||||
| CS55N-10 | 10 | 145 | 7.50 | ||||||
| CS75N-7 | 7 | 102 | 13.00 | 100 | 75 | Belt Drive | RP2" | 1110 | 1575*1160*1720 |
| CS75N-8 | 8 | 116 | 11.60 | ||||||
| CS75N-10 | 10 | 145 | 10.50 | ||||||
| ● Please connect with us if any specification is not in above table | |||||||||
- Atlas Copco Air-end
- Belt Driven
- PLC controller
- Air/Oil Separator
Atlas Copco Air-end
1, Higer Efficiency
2, Less Leakage
3, Long Service Life
2, Less Leakage
3, Long Service Life
Belt Driven
1, Optimized designfor belt drive
2, Easy for maintenance
2, Easy for maintenance
PLC controller
1,Intelligent and Smart
2,with the record, remind function
3, EN/CH 2 language can be chosen
2,with the record, remind function
3, EN/CH 2 language can be chosen
Air/Oil Separator
1, External Design, Easy for maintenance
2, Larger Filtration Area
2, Larger Filtration Area
SPECIFICATION
Relative products in the same category
